Toshiba Qosmio G30/797HS Viking Memory 4 Locate the memory expan INSTALLATION GUIDE sion slot in the open compart English

Viking Memory
4 Locate the memory expan
INSTALLATION GUIDE sion slot in the open compart
ment Notice the location of
TOSHIBA the off center key on the
Port g 300CT 310CT 320CT expansion slot



5 To install a memory module insert the module into the expansion slot
at an angle and then push it down until it clicks into place To be certain
that the module is installed correctly ensure that the off center notch on
the module is aligned with the off center key of the expansion slot The
module can only be installed one way due to the position of the notch




Manual No 1005207 Release 07 98 Rev B

S P E E D P OW E R P E R F O R M A N C E
The Toshiba Port g 300CT comes standard with 32MB of memory sol
dered It can be expanded to a maximum of 64MB by installing the fol 6 Replace the expansion cover and be sure to secure its two holding
lowing Viking Components memory options into its one available expan screws
sion slot 7 Replace the battery back into its compartment and turn the system
The Toshiba Port g 310CT and 320CT come standard with 32MB of right side up
memory soldered They can be expanded to a maximum of 96MB by 8 Replace the AC power supply and any other cables you may have dis
installing the following Viking Components memory options into their connected
one available expansion slot 9 Open the display screen and turn the system on The computer will
Description Viking P N automatically reconfigure itself to recognize the newly added memory
16MB Memory Module T30016 RT30016 The new memory can be verified during the POST routine at start up and
32MB Memory Module T30032 RT30032 at the SETUP utility
64MB Memory Module T30064 RT30064 The installation is now complete

WARRANTY DISCLAIMERS
All Viking Components products have been thoroughly tested free of defects in
material and workmanship If any malfunction should occur while using one of
our products in its recommended environment Viking at its option will repair or
replace the product at no charge provided the product or any part thereof has not
Caution been abused misused neglected replaced repaired or modified Viking shall
Electro Static Discharge ESD can damage electronic components Before make the final determination as to the existence and the cause of any defect
touching the memory module ensure that you are discharged of static elec Viking will not repair or replace products designated as having a Limited
tricity by touching a grounded metal object Lifetime which fail solely because their estimated life has expired No warranty
INSTALLATION INSTRUCTIONS is made with respect to customer products produced to original purchaser specifi
cations except as specifically stated in writing by Viking
1 Turn the computer off and disconnect the AC power supply and any
All shipping costs shall be the responsibility of the purchaser
other cables from the unit
Except as provided herein there are no express or implied warranties of mer
Note If the unit appears to be powered down ensure that it is not in chantability or fitness for a particular purpose Under no circumstances will
Suspend mode Viking Components be liable in any way to the purchaser for any damages includ
2 Turn the computer upside down Remove the battery from the system ing but not limited to lost revenue lost wages or any other incidental or conse
If a second battery is installed remove it as well If you are not familiar quential damages arising out of the use of or inability to use this product Viking
with this procedure please refer to your computer s Owner s Manual reserves the right to make modifications in both hardware and software without
prior notifications
All Viking Components are 100 guaranteed compatible with the OEM machines
3 Locate the memory expansion for which they are designed All OEM s names trademarks and part numbers are
cover on the bottom panel used for identification purposes only and in no way imply that any of our products
Locate the two holding screws are original equipment parts
securing the cover to the bottom Toshiba and Port g are registered trademarks of Toshiba Corporation
panel Remove the screws with a
small Phillips Head screwdriver
Then remove cover by lifting up

Copyright 1998 Viking Components Inc